Nature's Generator MyGrid 10K Gen 2 Solar Generator for Home

The Nature's Generator MyGrid 10K Gen 2 is a high-capacity solar power system designed for home backup, off-grid applications, and other high-power energy needs. It combines a 10,000W continuous-output inverter with a 10,496Wh LiFePO4 battery and can be paired with compatible solar panels for renewable energy charging.

The system supports 120V/240V split-phase or 120V/208V three-phase output and offers expandable battery and power capacity for larger energy requirements. Its modular design allows the system to be configured and expanded as your power needs change.

High-Capacity Home Power

With 10,000W of continuous output and up to 20,000W of peak output, the MyGrid 10K Gen 2 is designed to support a wide range of household electrical loads. The system uses a 51.2V 205Ah LiFePO4 battery with 10,496Wh of storage capacity.

For larger applications, the system can be expanded with compatible batteries and additional MyGrid 10K units. Depending on the configuration, battery capacity can be expanded up to 73.4kWh.

Solar Charging and Energy Storage

The MyGrid 10K Gen 2 can be paired with compatible solar panels to capture and store solar energy. Available configurations include high-efficiency 440W rigid bifacial solar panels featuring N-type TOPCon cell technology.

The bifacial solar panels can generate power from both sides of the panel when installation conditions allow, helping make use of reflected sunlight.

Flexible Power Options

• 10,000W continuous inverter output
• 20,000W peak output
• 120V/240V split-phase output
• 120V/208V three-phase output
• Pure sine wave power
• LiFePO4 battery chemistry
• Solar charging capability
• AC charging capability
• Expandable battery capacity
• Automatic switching in less than 20 milliseconds
• Compatible with AC-coupled solar systems and Rapid Shutdown applications

Expandable Energy Storage

The MyGrid 10K Gen 2 is designed with an expandable architecture. A second compatible unit can increase system output, while additional MyGrid batteries can increase total energy storage capacity. The maximum configuration depends on the compatible components and installation setup.

440W Rigid Bifacial Solar Panels

Available solar generator configurations include 440W rigid bifacial solar panels with N-type TOPCon cells. Each panel is rated for up to 440W of power and features an anodized aluminum frame and MC4-compatible IP68-rated connectors.

• Rated Power: 440W
• Cell Type: N-Type TOPCon
• Module Efficiency: 22.53%
• Maximum Power Voltage: 32.30V
• Maximum Power Current: 13.63A
• Open-Circuit Voltage: 38.80V
• Short-Circuit Current: 14.39A
• Dimensions: 67.8 × 44.6 × 1.2 inches
• Weight: 54 lbs per panel

Technical Specifications

• Model: MyGrid 10K Gen 2
• Continuous Output: 10,000W
• Peak Output: 20,000W
• Expandable Continuous Output: Up to 20,000W
• Expandable Peak Output: Up to 40,000W
• Output Voltage: 120V/240V Split Phase or 120V/208V
• Output Frequency: 60Hz
• Output Waveform: Pure Sine Wave
• Automatic Switching: Less than 20ms
• Battery Capacity: 10,496Wh
• Battery Rating: 51.2V, 205Ah
• Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
• Battery Cycle Life: More than 6,000 cycles
• Battery Weight: 213 lbs
• Recommended Battery Recharge: Every 6 months during storage
• Warranty: 5-Year Limited Warranty

Safety and Certifications

The MyGrid 10K Gen 2 uses an integrated battery management system to monitor the battery system. The inverter is certified to ANSI/CAN/UL 1741, while the battery system carries ANSI/CAN/UL 1973 certification.

Available Solar Configurations

The MyGrid 10K Gen 2 is available in configurations that include the power system with either 8 or 12 compatible 440W rigid bifacial solar panels. The exact components included depend on the configuration selected.

What's Included

MyGrid 10K Gen 2 + 8 × 440W Rigid Bifacial Solar Panels:

• 1 × MyGrid 10K Gen 2 Generator
• 1 × MyGrid 10K Battery
• 1 × AC Power Cord
• 1 × Battery Cable Set
• 1 × Communication Cable
• 2 × MyGrid 10K Mounting & Security Hardware
• 8 × 440W Rigid Bifacial Solar Panels
• 2 × 50 ft Quick Release Solar Cables

MyGrid 10K Gen 2 + Solar Battery + 12 × 440W Rigid Bifacial Solar Panels:

• 1 × MyGrid 10K Gen 2 Generator
• 2 × MyGrid 10K Batteries
• 1 × AC Power Cord
• 2 × Battery Cable Sets
• 2 × Communication Cables
• 3 × MyGrid 10K Mounting & Security Hardware
• 12 × 440W Rigid Bifacial Solar Panels
• 3 × 50 ft Quick Release Solar Cables

Important Information

Actual power output, solar production, runtime, and charging performance vary depending on connected loads, sunlight conditions, installation configuration, temperature, battery condition, and other operating factors. Verify electrical requirements and installation specifications before connecting the system to a home or other electrical system. Professional installation may be required depending on the application and local electrical requirements.