Nature's Generator MyGrid 10K Gen 2 Solar and Wind Generator for Home

The Nature's Generator MyGrid 10K Gen 2 Solar and Wind Generator is a high-capacity whole-home power system combining a 10,000W pure sine wave inverter, 10,496Wh LiFePO₄ battery, 440W bifacial solar panels, and a 350W wind turbine. The system provides multiple renewable charging sources in one expandable energy storage solution.

Designed for residential, commercial, off-grid, and backup applications, the MyGrid 10K Gen 2 supports 120V/240V split-phase or 120V/208V two-of-three-phase output. Its expandable architecture allows additional MyGrid 10K units and batteries to be added as power and storage requirements increase.

🛠️ Product Overview

• 10,000W continuous output
• 20,000W peak output
• 20,000W expandable continuous power
• 40,000W expandable peak power
• 10,496Wh LiFePO₄ battery capacity
• 51.2V 205Ah battery configuration
• More than 6,000 cycles with more than 70% capacity retention
• 120V/240V split-phase or 120V/208V two-of-three-phase output
• Pure sine wave power
• Less than 20ms automatic switching
• Solar, wind, AC, and compatible external generator charging options
• AC coupling and Rapid Shutdown support
• Expandable battery capacity up to 73.4kWh with seven batteries
• Includes eight 440W rigid bifacial solar panels and a 350W wind turbine in the base configuration

10,000W Whole-Home Power

The MyGrid 10K Gen 2 delivers 10,000W of continuous power with up to 20,000W of peak output. Its 120V/240V split-phase capability allows it to support a wide range of compatible household loads and equipment.

Large-Capacity LiFePO₄ Battery

The included battery provides 10,496Wh of energy storage using lithium iron phosphate chemistry. The battery is rated for more than 6,000 cycles while retaining more than 70% of its capacity, providing a long-cycle energy storage solution for backup and renewable power applications.

Solar and Wind Charging

The complete system combines solar and wind generation for renewable charging. The included package features eight 440W rigid bifacial solar panels together with a 350W wind turbine. The wind turbine can provide supplemental charging during periods when solar production is reduced, including cloudy conditions and nighttime operation.

Expandable Power and Storage

The MyGrid 10K Gen 2 can be expanded for larger energy requirements. Two MyGrid 10K units can provide up to 20,000W of continuous power, while the battery system can be expanded to as much as 73.4kWh using seven compatible batteries.

Flexible Charging Options

The system can be recharged from a standard 120V outlet, a compatible 208/240V NEMA 14-50R outlet, solar panels, or a wind turbine. It can also support charging from an external fuel generator. Solar and wind charging are prioritized over the 208/240V grid charging input according to the manufacturer.

AC Coupling and Rapid Shutdown

Compatible rooftop solar systems can continue contributing energy during grid outages through the system's AC-coupling capability. Rapid Shutdown support is also included for compatible solar installations.

Plug-and-Play System Design

The MyGrid 10K Gen 2 is designed for simplified setup without permanent modifications to the home. The manufacturer describes the system as plug-and-play and notes that it can be recharged using a standard 120V outlet without necessarily requiring an electrical panel upgrade.

Technical Specifications

Product	MyGrid 10K Gen 2 Solar and Wind Generator for Home
SKU	NGMGTNAUWA
Continuous Output	10,000W
Peak Output	20,000W
Expandable Continuous Power	20,000W
Expandable Peak Power	40,000W
Output Voltage	120V/240V Split Phase or 120V/208V 2 of 3 Phases
Output Frequency	60Hz
Output Power Form	Pure Sine Wave
Automatic Switching	<20ms
Battery Capacity	51.2V 205Ah / 10,496Wh
Battery Chemistry	Lithium Iron Phosphate (LiFePO₄)
Battery Cycle Life	More than 70% capacity after 6,000 cycles
Expandable Battery Capacity	Up to 73.4kWh with 7 batteries
120V AC Charging	1000W
Generator Dimensions	21.8 x 8.5 x 38.5 inches (555.4 x 216 x 980mm), excluding mounting bar
Generator Weight	152 lb (69kg)
Battery Dimensions	21.8 x 8.5 x 23.4 inches (555.4 x 216 x 596mm), excluding mounting bar
Battery Weight	213 lb (96.6kg)
Optimal Operating Temperature	68–86°F (20–30°C)
Battery Charging Temperature	32–113°F (0–45°C)
Battery Discharging Temperature	14–113°F (-10–45°C)
Storage Temperature	14–113°F (-10–45°C)
Warranty	5-Year Limited Warranty
Generator Certification	ANSI/CAN/UL 1741
Battery Certification	ANSI/CAN/UL 1973

440W Rigid Bifacial Solar Panel Specifications

Rated Power	440W
Maximum Power Voltage	32.30V
Maximum Power Current	13.63A
Open-Circuit Voltage	38.80V
Short-Circuit Current	14.39A
Module Efficiency	22.53%
Cell Type	N-Type TOPCon 182 × 91mm
Half-Cells	108 (6 × 18)
Dimensions	67.8 x 44.6 x 1.2 inches
Weight	54 lb (24.5kg)
Junction Box	IP68, MC4 compatible
Operating Temperature	-40°F to +185°F (-40°C to +85°C)

350W Wind Turbine Specifications

Rated Power	350W at 27 MPH
Maximum Wind Speed	110 MPH
Rotor Diameter	63 inches (1.6m)
Blade Material	Fiberglass Nylon Composite
Body Material	Cast Aluminum Alloy with Powder Coating
Cable	12AWG Pure Copper
Connectors	Weatherproof M19 3P Wind Turbine Cable Connectors and Anderson Wind Input Connectors
Yaw Compatibility	1.5-inch Schedule 40 Pipes or Towers
Weight	37 lb (17kg)
Certification	CE RoHS

What's Included – Base Configuration

• 1 × MyGrid 10K Gen 2 Generator
• 1 × MyGrid 10K Battery
• 1 × AC Power Cord
• 1 × Battery Cable Set
• 1 × Communication Cable
• 2 × MyGrid 10K Mounting & Security Hardware
• 8 × 440W Rigid Bifacial Solar Panels
• 2 × 50ft Quick Release Solar Cables
• 1 × 350W Wind Turbine
• 1 × 100ft Wind Turbine Cable
• 1 × Wind Turbine Blade Set
• 1 × Wind Turbine Controller Box and Accessories

Available Configurations

• Base Package: MyGrid 10K Gen 2 + 8 × 440W Rigid Solar Panels + 350W Wind Turbine
• Expanded Package: MyGrid 10K Gen 2 + Additional Solar Battery + 12 × 440W Rigid Solar Panels + 350W Wind Turbine

Ideal For

• Whole-home backup power
• Residential energy storage
• Off-grid power systems
• Solar and wind energy storage
• Homes with high electrical loads
• Commercial and light industrial applications
• RVs, tiny homes, and other compatible installations
• Emergency backup power
• Expandable renewable energy systems

The Nature's Generator MyGrid 10K Gen 2 Solar and Wind Generator combines high-output inverter power, LiFePO₄ energy storage, bifacial solar generation, and wind charging in a single expandable system. With 10,000W of continuous output and 10,496Wh of battery capacity, it is designed for applications requiring substantially more power and storage than conventional portable power stations.

Its modular architecture allows additional batteries and a second MyGrid 10K unit to be added as requirements grow. Support for multiple charging sources, AC coupling, Rapid Shutdown, and multiple voltage configurations makes the MyGrid 10K Gen 2 a flexible option for whole-home backup, off-grid energy storage, and compatible residential or commercial power applications.

Warranty: 5-Year Limited Warranty